General Welding Consumables · Welding Consumables
Y-DL(x2) / NSH-50M / NSH-1RM appears on DNV Type Approval certificate TAW00005GU, issued by DNV SE on 2023-08-03 to NIPPON STEEL WELDING & ENGINEERING CO.,LTD., Narashino Plant, based in Japan. Such sets add a backing material to the wire and flux so that the root of a one-sided joint is supported. The register classifies the product as a wire/flux/backing combination within the category Welding Consumables, and the certificate is valid until 2028-08-02.
Wire, flux and backing combinations of this kind are typically used for one-sided submerged-arc welding of butt joints, where a backing material supports the root side of the weld.
Listed in the DNV Approval Finder at the time we recorded it. The certificate is issued by DNV, not by us; check its current status at DNV.
Free of charge — send us your request for NIPPON STEEL WELDING & ENGINEERING CO.,LTD., Narashino Plant equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, NIPPON STEEL WELDING & ENGINEERING CO.,LTD., Narashino Plant first.
Tell us what you need for this NIPPON STEEL WELDING & ENGINEERING CO.,LTD., Narashino Plant Y-DL(x2) / NSH-50M / NSH-1RM — a part, a service call, a second opinion. Are you NIPPON STEEL WELDING & ENGINEERING CO.,LTD., Narashino Plant? Claim this brand page.
Service engineer? Write the day report for this Y-DL(x2) / NSH-50M / NSH-1RM in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.