Wood Products (Plywood / Laminated Wood) · Marine Interior & Construction Materials
Jiangsu GuangJia New Material Technology Co., Ltd. of China holds DNV Type Approval certificate TAK00002CD, issued by DNV SE on 2024-04-26, for GJ-01. DNV registers the product type as Wood Products within the Non-metallic Materials category, a group that typically covers plywood and laminated wood panels. The certificate is valid until 2029-04-25.
Wood products of this kind are typically used for interior panelling, furniture and joinery in accommodation spaces on board.
| Visual inspection of panels | every 12 months - confirm against the maker's manual |
|---|---|
| Moisture content testing | every 24 months - confirm against the maker's manual |
| Fastener torque verification | every 12 months - confirm against the maker's manual |
| Sealant and fire‑retardant coating condition review | every 12–24 months - confirm against the maker's manual |
| Edge compression / load bearing check | every 24 months - confirm against the maker's manual |
Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.
| Moisture content | typically 8‑12 % for marine interior wood - confirm against the maker's manual |
|---|---|
| Delamination depth | generally not exceeding 2 mm visible separation - confirm against the maker's manual |
| Fire‑retardant coating loss | ≤10 % area loss of coating - confirm against the maker's manual |
| Edge compression under design load | compression no greater than 1 mm - confirm against the maker's manual |
Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.
Class societies require a current DNV Type Approval certificate, documented installation records, periodic visual inspection reports, moisture content logs, verification of fire‑retardant coating condition, and repair documentation for any damaged panels. Surveys should include evidence that sealants and fasteners remain within approved torque limits and that no delamination exceeds the wear limits noted above.
Estimated lifetime: ≈300,000–400,000 operating hours (30–40 years) – confirm against the maker's manual
Listed in the DNV Approval Finder at the time we recorded it. The certificate is issued by DNV, not by us; check its current status at DNV.
Free of charge — send us your request for Jiangsu GuangJia New Material Technology Co., Ltd. equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type.
Tell us what you need for this Jiangsu GuangJia New Material Technology Co., Ltd. GJ-01 — a part, a service call, a second opinion. Are you Jiangsu GuangJia New Material Technology Co., Ltd.? Claim this brand page.
Service engineer? Write the day report for this GJ-01 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.