OceanSphereENGINES
Library› Electrical› Marine Cables & Wiring› General Marine Cables› Nexans (Suzhou) Cable Solutions TIOI or TICI or TIOI-FLEX or TICI-FLEX
Nexans (Suzhou) Cable Solutions

TIOI or TICI or TIOI-FLEX or TICI-FLEX

General Marine Cables · Marine Cables & Wiring

Class-certified type (DNV register) · technical data sheet not yet verified​​⁠​​​‍⁠⁠‍‌‍‍‌​⁠⁠⁠⁠‍

TIOI or TICI or TIOI-FLEX or TICI-FLEX by Nexans (Suzhou) Cable Solutions Co.,Ltd. DNV TA certificate TAE00004XA.

Inspection

Inspector Detail

Common issues

  • Insulation resistance degradation from moisture ingress at gland or termination points
  • Conductor overheating at loose or corroded terminations
  • Mechanical damage or chafing where cables run over sharp edges or through unprotected penetrations
  • Sheath cracking or embrittlement from prolonged heat or UV exposure on exposed runs
  • Fire-stop penetration seals deteriorating or not reinstated after a cable pull
  • Cable selected without confirming ambient temperature rating for hot spaces such as engine rooms
  • Connector or gland corrosion in damp or exposed spaces
  • Rodent or vermin damage to cable trays in accommodation and store spaces

Inspection checklist

  • Visual check of outer sheath for cracking, abrasion or discoloration on accessible runs
  • Verify cable support and clip spacing, no excessive sag or strain on terminations
  • Check gland seals at bulkhead and deck penetrations for tightness and corrosion
  • Verify fire-stop sealing at penetrations matches the approved arrangement
  • Insulation resistance (megger) test on major circuits, trended over time
  • Check terminations for tightness, discoloration or heat damage
  • Verify segregation from fuel, hydraulic lines and hot surfaces is maintained
  • Confirm cable route markings/tags are legible and match as-built diagrams
  • Check bend radius at cable entries against the approved minimum

Service intervals

Insulation resistance test on major circuitsannually, or aligned with class continuous survey
Visual inspection of accessible runs and glandsevery 12 months
Fire-stop penetration integrity checkat each survey or after any cable modification
Termination tightness check on high-load circuitsevery 2-3 years or per class recommendation

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Critical spares

  • Cable glands and gasket sets matching penetration size
  • Terminal lugs and heat-shrink boots
  • Fire-stop sealant/putty for re-sealing disturbed penetrations
  • Replacement cable of the same type-approved construction for local repairs
  • Self-amalgamating tape rated for marine use
  • Spare crimp connectors

Safety

  • Electric shock from damaged insulation on live low-voltage circuits
  • Fire propagation along unsealed cable runs or ducts where fire-stops are missing or degraded
  • Toxic smoke from degraded or non-approved sheath material if the cable is involved in a fire
  • Arc flash risk at loose or overheated terminations under load

Class survey

Type approval (DNV TA certificate) confirms fire, smoke and flame-retardant performance to the relevant IEC 60092-350/360 series requirements at manufacture; class surveys typically focus on the condition of fire-stop penetrations, damage on exposed runs and insulation resistance records rather than the cable itself in isolation.

Classification

DNV type approval

Listed in the DNV Approval Finder at the time we recorded it. The certificate is issued by DNV, not by us; check its current status at DNV.

CertificateTAE00004XA
Open the certificate at DNV
Need this part?

Request a quote for this model.

Free of charge — send us your request for Nexans (Suzhou) Cable Solutions equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in General Marine Cables.

Other models of the same equipment type, Nexans (Suzhou) Cable Solutions first.

By manufacturer TMC Co., LtdKukdong Electric WireYangzhou Guangming Cable Co., LtdHelkama BicaLS Cable & System Ltd (Donghae Plant)Schneider ElectricPhoenix ContactPrysmian Group NorgeTriCab (USA)Untel Kablolari San. ve TicUNIKAPrysmian Cavi e Sistemi ItaliaZhongtian Technology Industrial Wire & Cable System Co.,Ltd.Baosheng Science & Technology Innovation Co., Ltd.Jiangsu Jiangyang Special Cable Co., Ltd.All manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like TIOI or TICI or TIOI-FLEX or TICI-FLEX
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Nexans (Suzhou) Cable Solutions TIOI or TICI or TIOI-FLEX or TICI-FLEX — a part, a service call, a second opinion. Are you Nexans (Suzhou) Cable Solutions? Claim this brand page.

Service engineer? Write the day report for this TIOI or TICI or TIOI-FLEX or TICI-FLEX in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.