Drilling Equipment (General) · Drilling & Well Control
Fluid Ends - 4 1/2", 4" and 3 3/8" for 500W Pumps, Fluid Ends - 4 1/2", 4" and 3 1/2", 3" and 2 3/4" for 600S Pumps by Yantai Jereh Petroleum Equipment & Technologies Co., Ltd. DNV TA certificate TAD00000YZ.
Listed in the DNV Approval Finder at the time we recorded it. The certificate is issued by DNV, not by us; check its current status at DNV.
Free of charge — send us your request for Yantai Jereh Petroleum Equipment & Technologies Co., Ltd. equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Yantai Jereh Petroleum Equipment & Technologies Co., Ltd. first.
Tell us what you need for this Yantai Jereh Petroleum Equipment & Technologies Co., Ltd. Fluid Ends - 4 1/2", 4" and 3 3/8" for 500W Pumps, Fluid Ends - 4 1/2", 4" and 3 1/2", 3" and 2 3/4" for 600S Pumps — a part, a service call, a second opinion. Are you Yantai Jereh Petroleum Equipment & Technologies Co., Ltd.? Claim this brand page.
Service engineer? Write the day report for this Fluid Ends - 4 1/2", 4" and 3 3/8" for 500W Pumps, Fluid Ends - 4 1/2", 4" and 3 1/2", 3" and 2 3/4" for 600S Pumps in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.