OceanSphereENGINES
Library› Cargo› Cargo Level & Temperature Gauging› Radar Level Gauge› J.P. Sauer & Sohn Maschinenbau GmbH System BR, System BI, System KWT, System WK
J.P. Sauer & Sohn Maschinenbau GmbH

System BR, System BI, System KWT, System WK

Radar Level Gauge · Cargo Level & Temperature Gauging

Class-certified type (DNV register) · technical data sheet not yet verified​​‍⁠⁠‍‌‍‌‍‌​​⁠⁠‌‍​‌⁠

System BR, System BI, System KWT, System WK by J.P. Sauer & Sohn Maschinenbau GmbH. DNV TA certificate TAA00000MS.

Inspection

Inspector Detail

Common issues

  • Pressure/temperature sensor drift causing false trips or missed alarms
  • Cooling water temperature switch fouling or scaling, affecting trip accuracy
  • Wiring and connector corrosion in a humid engine room environment
  • Control panel relay or I/O card failure
  • Pressure gauge/transmitter calibration drift over time
  • Loose or corroded earthing/shielding causing signal noise on control wiring

Inspection checklist

  • Function-test the cooling water high-temperature trip/alarm against a known reference
  • Function-test discharge pressure/temperature trips
  • Verify sensor readings against a calibrated portable instrument
  • Inspect control panel wiring and terminals for corrosion
  • Review the alarm/trip log for nuisance trips indicating sensor drift
  • Confirm the interlock with the associated compressor's unloader/safety valve functions correctly
  • Visual check of gauge glass/dial condition and pointer zero

Service intervals

Sensor/transmitter calibration checkannual or per maker recommendation
Trip/alarm function testannual, coordinated with the associated compressor overhaul
Control panel inspection (corrosion/wiring)annual
Cooling water temperature switch cleaningcondition-based, typically annual in fouling-prone systems

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Critical spares

  • Cooling water temperature sensor/switch
  • Pressure transmitter
  • Control relay/contactor
  • Fuse/circuit protection module
  • Pressure gauge or gauge glass

Safety

  • Work on live control circuits - isolate and lock out before opening panels
  • Compressed air/gas system pressure hazard when testing pressure switches in situ
  • Hot cooling water lines near sensor mounting locations

Class survey

Note: the catalog category for this entry (Cargo Level & Temperature Gauging) does not appear to match the manufacturer's actual product line. J.P. Sauer & Sohn Maschinenbau GmbH is a marine reciprocating compressor manufacturer (starting/control air compressors); the listed designations ('System BR', 'System BI', 'System KWT', 'System WK') most likely denote control, cooling-water or monitoring sub-systems supplied with its compressor packages rather than a cargo gauging product. This entry addresses that likely actual product type and should be re-verified against the DNV TA certificate (TAA00000MS) and maker documentation before publishing. Where confirmed, class typically reviews such control/monitoring functions as part of the associated compressor's Continuous Survey Machinery scope rather than as a standalone item.

Estimated lifetime: Instrumentation and control components on a compressor control package are typically renewed on a condition/calibration basis, commonly well within an 8-12 year cycle, rather than tracked against a running-hour figure - confirm against the specific package documentation.

Classification

DNV type approval

Listed in the DNV Approval Finder at the time we recorded it. The certificate is issued by DNV, not by us; check its current status at DNV.

CertificateTAA00000MS
Open the certificate at DNV
Need this part?

Request a quote for this model.

Free of charge — send us your request for J.P. Sauer & Sohn Maschinenbau GmbH equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Radar Level Gauge.

Other models of the same equipment type, J.P. Sauer & Sohn Maschinenbau GmbH first.

By manufacturer Endress+HauserKrohneEmerson RosemountVEGATokyo KeikiBarksdaleDanfossPanasiaSiemensNORIS AutomationEmersonHanla IMSHoneywellIfm ElectronicJUMOAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like System BR, System BI, System KWT, System WK
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this J.P. Sauer & Sohn Maschinenbau GmbH System BR, System BI, System KWT, System WK — a part, a service call, a second opinion. Are you J.P. Sauer & Sohn Maschinenbau GmbH? Claim this brand page.

Service engineer? Write the day report for this System BR, System BI, System KWT, System WK in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.