General Welding Consumables · Welding Consumables
Kobe Steel, Ltd. Ibaraki Plant of Japan holds DNV SE Type Approval certificate TAW00000N7 for DW-100V / C1 / FB-B3, issued on 2026-01-15 and valid until 2030-12-31. This certificate covers a three-part set, listed by DNV as Flux Cored Wire/Gas/Backing combination, in the Welding Consumables category. Backing materials of this kind are typically placed behind a joint to support the root pass in one-sided welding.
Sets of flux cored wire, shielding gas and backing are typically used for one-sided butt welding of steel plate, for example in shipyard panel and block fabrication.
Listed in the DNV Approval Finder at the time we recorded it. The certificate is issued by DNV, not by us; check its current status at DNV.
Free of charge — send us your request for Kobe Steel, Ltd. Ibaraki Plant equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Kobe Steel, Ltd. Ibaraki Plant first.
Tell us what you need for this Kobe Steel, Ltd. Ibaraki Plant DW-100V / C1 / FB-B3 — a part, a service call, a second opinion. Are you Kobe Steel, Ltd. Ibaraki Plant? Claim this brand page.
Service engineer? Write the day report for this DW-100V / C1 / FB-B3 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.