OceanSphereENGINES
Pyrotek

Decidamp SLC

Marine Flooring · Marine Interior & Construction Materials​​‍‍‌⁠‍⁠⁠⁠​‌⁠‍‌⁠​‌⁠‍

DNV type approval · certificate MEDB00007RN · check status at the register

Decidamp SLC from Pyrotek is a marine flooring system used as a primary deck covering with sound damping properties and is listed as IMO approved. It is applied in layers on steel decks in accommodation and similar spaces as a base for finished floors, reducing vibration and structure-borne noise. It is a poured or applied material rather than a mechanical product, and it is typically hidden under the final floor covering.

Specifications

Technical data.

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

IMO ApprovedYes
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Because Decidamp SLC is normally concealed, routine checks focus on symptoms such as loose floor areas, cracking, water ingress and unexplained changes in vibration or noise. When floor coverings are opened for repair, inspect adhesion, cure condition and the underlying steel for corrosion. Any damaged section should be repaired using the Pyrotek preparation, mixing and layer-build procedure applicable to the installed system. Protect adjacent damping material during hot work and reinstate any removed acoustic build-up before closing the deck. Mix ratio, minimum or maximum layer dimensions, cure times and environmental limits must be taken directly from the current product documentation.

Inspection

Common failures & inspection points

Inspection

Inspector Detail

Common issues

  • Cover abrasion and fraying from repeated deck dragging and chafing on edges
  • Coupling corrosion (brass/aluminium) causing seizure or leakage at connection
  • Internal lining perishing or cracking with age and UV exposure, leading to pinhole leaks
  • Mildew and rot in canvas-type hoses from stowage while still damp
  • Gasket/washer deterioration at coupling face causing leakage under pressure
  • Kink damage or crushed sections from improper flaking or reel storage

Inspection checklist

  • Visual check of full hose length for cuts, abrasion, cracking of the cover
  • Pressure test at the hose's declared working pressure per SOLAS/flag requirement
  • Check coupling threads for corrosion, wear, cross-threading
  • Verify gasket/washer present and serviceable at each coupling
  • Confirm hose length/diameter matches the fire control plan for its station
  • Check reel or rack stowage - correct flaking, free running, no kinks
  • Verify certification tag legible (size, length, test date, MED approval)
  • Function-test coupling-to-nozzle connection for secure fit

Service intervals

Pressure testannually, per SOLAS/flag requirement
Visual inspectionmonthly, typically combined with fire drill rounds
Full renewalcondition-based, commonly considered around 10-15 years of age - confirm against flag/class guidance

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Critical spares

  • Coupling sets matched to hose diameter (instantaneous/threaded type as fitted)
  • Coupling gaskets/washers
  • Spare hose lengths matching diameter and pressure rating
  • Storage reel/rack fittings (pins, straps, brackets)

Safety

  • Coupling failure under pressure can whip the hose end - keep clear of coupling during pressure testing
  • Never charge a hose with visible cover damage - risk of sudden burst
  • Do not exceed the hose's declared working pressure during testing

Class survey

Fire hoses are checked under the ship's Fire Fighting Equipment listing at annual/renewal survey; surveyors expect a current pressure test record, legible MED approval marking, and correct hose allocation against the fire control plan.

Spares

Replacement Parts

Spare parts notes

This product is a consumable material rather than a machine with mechanical spares. For planned repairs, stock only unopened, in-date components from the correct Decidamp SLC system together with any specified primer or compatible preparation material. Because shelf life and storage conditions matter, large permanent onboard stocks are usually less useful than controlled procurement for scheduled work. Keep the product data and batch information with any material carried onboard.

Classification

DNV type approval

Listed in the DNV Approval Finder at the time we recorded it. The certificate is issued by DNV, not by us; check its current status at DNV.

CertificateMEDB00007RN
Open the certificate at DNV
Need this part?

Request a quote for this model.

Free of charge — send us your request for Pyrotek equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Marine Flooring.

Other models of the same equipment type.

By manufacturer Sika ServicesBolidt Kunststoftoepassing B.V.Suzhou Yibo Industry & Trading Co., Ltd.Swedac, Swedish Acoustic Products InnovationJFE Steel – Technical Report No. 20Marlon TørmørtelHerculan B.V.GERFLOR SASJingjiang Dakeyuan New Material Engineering Co., Ltd.Daehyup TechWuxi Jiuzhou Marine Deck Covering Co., Ltd.Taicang Hongle Marine Fittings Co.,Ltd.DMS ApSNantong Ruipu Marine Covering and Paint Technology Co., Ltd.ODS Ocean Decking Solutions GmbHAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like Decidamp SLC
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Pyrotek Decidamp SLC — a part, a service call, a second opinion. Are you Pyrotek? Claim this brand page.

Service engineer? Write the day report for this Decidamp SLC in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.