OceanSphereENGINES
Library› HVAC› Marine Interior & Construction Materials› General Interior Materials› Saint-Gobain Weber GmbH weber.floor 4685G Marine Ultra Light
Saint-Gobain Weber GmbH

weber.floor 4685G Marine Ultra Light

General Interior Materials · Marine Interior & Construction Materials​​‍‍​​​⁠⁠⁠‍​​⁠​​⁠​‌⁠

DNV type approval · certificate MEDB00006AA · check status at the register

Weber.floor 4685G Marine Ultra Light by Saint-Gobain Weber GmbH is a marine lightweight deck-flooring compound used in ship interior construction or deck finishing. It is installed as part of an approved accommodation, service-space or interior surface system rather than as an isolated decorative product. Performance depends on the prepared substrate, compatible primers or adhesives, joint detailing and preservation of the approved material build-up. Damage around penetrations, weld seams, thresholds or heavily trafficked areas can expose the substrate and compromise appearance or system integrity. Neighboring products in the manufacturer's range may differ in density, thickness, finish, fire performance or application method. Repairs should therefore reproduce the approved system using the maker's documented components and application procedure.

Specifications

Technical data.

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

IMO ApprovedYes
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Inspect accessible surfaces for cracking, delamination, moisture damage, impact damage and failed edge details. Keep the substrate dry and correct leakage sources before cosmetic repair. Use only compatible repair materials and follow the maker's surface-preparation and curing instructions. Where the material forms part of an approved fire-rated or low-flame-spread arrangement, retain product identification and repair records for survey. Exact application thickness, curing conditions and repair limits must come from the manufacturer documentation and approval system.

Inspection

Common failures & inspection points

Inspection

Inspector Detail

Common issues

  • Delamination or blistering where the substrate was not adequately prepared or primed
  • Moisture entrapment beneath the covering leading to adhesion loss
  • Cracking at deck plate expansion joints or weld seams if not detailed correctly
  • Loss of anti-slip surface texture with heavy foot traffic over time
  • Surface staining or discoloration from chemical or fuel spills

Inspection checklist

  • Visual check for blistering, lifting edges, or delamination at joints
  • Check for cracking along deck seams, hatch coamings and door thresholds
  • Verify anti-slip surface texture is still effective in wet areas
  • Check for moisture ingress signs (discoloration, soft spots) at deck penetrations
  • Confirm the fire safety certificate on file matches the installed product batch

Service intervals

Recoating or local repaircondition-based on traffic and exposure - no fixed interval specified by class; follow the owner's/yard's maintenance plan

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Critical spares

  • Matching topcoat/repair compound held aboard from the same batch, for local patch repairs
  • Edge trim/nosing strip material, if used at deck penetrations in the original installation
  • Compatible primer/adhesive for re-bonding lifted edges, matched to the original system

Safety

  • Anti-slip performance is safety-critical in wet or oily areas - degraded texture increases slip risk
  • Confirm the fire test certificate (IMO FTP Code Part 5/2 or equivalent) matches the installed product for the space's fire safety requirement
  • Follow ventilation requirements during application - solvent/VOC exposure risk in enclosed spaces

Class survey

Class/flag checks that the installed covering matches the type approval certificate (DNV MED module MEDB00006AA) for the fire rating and smoke/toxicity classification referenced in the ship's fire control plan; keep the certificate on file with the applied area recorded.

Spares

Replacement Parts

Spare parts notes

Keep a limited quantity of the exact approved repair material, primer/adhesive and compatible finishing components where shelf life and storage conditions permit. Retain product labels and batch information needed to demonstrate compatibility with the approved system. Do not substitute generic building products in an approved marine interior system without verification.

Classification

DNV type approval

Listed in the DNV Approval Finder at the time we recorded it. The certificate is issued by DNV, not by us; check its current status at DNV.

CertificateMEDB00006AA
Open the certificate at DNV
Need this part?

Request a quote for this model.

Free of charge — send us your request for Saint-Gobain Weber GmbH equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in General Interior Materials.

Other models of the same equipment type, Saint-Gobain Weber GmbH first.

By manufacturer Jiangsu Hailu TechnologyHuanan Building Materials (Shenzhen)Sika DeutschlandCOSMO Co., Ltd.G. Theodor Freese GmbHEGE CarpetsPrzedsiebiorstwo ALWO Sp. z o.o.Sung Mi Co., Ltd.Bolidt Kunststoftoepassing B.V.Jiangyin Dongrui Decoration Materials Co., LtdSAINT-GOBAIN BYGGEVARER ASRockwoolARDEX Skandinavia A/STianjin Huali Thermal Insulation Building Material Co., Ltd.INEXA Interiors (Nantong)All manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like weber.floor 4685G Marine Ultra Light
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Saint-Gobain Weber GmbH weber.floor 4685G Marine Ultra Light — a part, a service call, a second opinion. Are you Saint-Gobain Weber GmbH? Claim this brand page.

Service engineer? Write the day report for this weber.floor 4685G Marine Ultra Light in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.