Hubraum pro Zylinder96,4 Liter
Leistung pro Zylinder (46F)1200 kW @ 600 rpm
SFOC (Specific Fuel Oil Consumption)170-173 g/kWh ISO
Ventile2 Einlassventile, 2 Auslassventile pro Zylinder
KraftstoffeinspritzungDirekte Einspritzung (Twin-Pump)
AufladungTurbolader mit Ladeluftkühlung
Betriebsstunden Feldhistorie7.200.000+ Stunden seit 2004
Gewicht 6L4695 Tonnen
Gewicht 12V46F177 Tonnen
Gewicht 16V46214 Tonnen
Rated power14 400 kW
Dimensions (mm) and weights (tonnes)10 080 mm
Weight173 tonnes
Cylinder output1200 kW
Engine speed600 rpm
Engine output14400 kW
Mean effective pressure2.49 MPa
Flow at 100% load25.1 kg/s
Temperature at turbocharger intake, max.45 °C
Temperature after air cooler, nom.50 °C
Flow at 85% load22.2 kg/s
Flow at 75% load20.64 kg/s
Flow at 50% load13.8 kg/s
Temp. after turbo, 100% load364 °C
Temp. after turbo, 85% load336 °C
Temp. after turbo, 75% load338 °C
Temp. after turbo, 50% load356 °C
Calculated pipe diameter for 35 m/s1301 mm
Jacket water, HT-circuit1800 kW
Charge air, HT-circuit3084 kW
Charge air, LT-circuit1572 kW
Lubricating oil, LT-circuit1464 kW
Radiation420 kW
Pressure before injection pumps (PT101) at 85% load - HFO900...950 kPa
SFOC at 75% load (LFO)178.3 g/kWh
SFOC at 50% load (LFO)180.3 g/kWh
Pressure before bearings, nom. (PT 201)500 kPa
Pressure after pump, max.800 kPa
Suction ability main pump, including pipe loss, max.40 kPa
Prelubricating pressure, nom. (PT 201)80 kPa
Temperature before bearings, nom. (TE 201)56 °C
Temperature after engine, approx.75 °C
Pump capacity (main), engine driven306 m3/h
Pump capacity (main), electrically driven259 m3/h
Oil flow through engine200 m3/h
Prelubricating pump capacity (50/60Hz)70 m3/h
Oil tank volume in separate system, min22.5 m3
Oil consumption at 100% load, approx.0.7 g/kWh
Crankcase ventilation flow rate at full load3540 l/min
Crankcase ventilation backpressure, max.0.4 kPa
Oil volume in turning device70.0 l
Oil volume in speed governor7.1 l
Pressure at engine, after pump, nom. (PT 401)250 + static kPa
Pressure at engine, after pump, max. (PT 401)530 kPa
Temperature before cylinders, approx. (TE 401)74 °C
Temperature after charge air cooler, nom. (TE432)91...95 °C
Starting air system (Note 6) Pressure, nom. (PT 301)3000 kPa
Pressure at engine during start, min. (20°C) (PT 301)1500 kPa
Pressure at engine during start, max. (20°C) (PT 301)3000 kPa
Low pressure limit in air vessels1800 kPa
Consumption per start at 20°C (successful start)12.0 Nm3
Consumption per start at 20°C, (with slowturn)15.0 Nm3
Pump [kW]65
Electric motor [kW]75
Water inlet flow rate(l/min)48 l/min
Speed600 rpm
Frequency30 Hz
MX [kNm]35 kNm
Engine type12V46F
B [mm]3200