9L H32/40
The HiMSEN 9L H32/40 is a medium‑speed, four‑stroke diesel main engine delivering 5 220 kW at 750 rpm, notable for its compact Miller‑cycle design and ability to run both marine diesel oil and heavy fuel oil up to 700 cSt.
Engine Specifications
Other Cylinder Configurations 33
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Inspect turbocharger for fouling/contamination; clean if necessary when high exhaust gas temperatures detected; check fuel quality for excessive sulfur content
Check Fuel Pump Rack Index for even distribution; verify Maximum Firing Pressure and injection timing; inspect fuel injectors and intake/exhaust valve condition
Inspect piston rings for damage/breakage; measure ring groove clearances; verify correct cylinder oil grade (BN balance); check for lacquering on cylinder liner surface
Measure liner bore diameter at multiple points; inspect for scratches/burrs; verify crosshatch honing pattern; confirm correct lubricant viscosity and additives per specifications
Test fuel injectors with injection tester; check nozzle spray pattern; verify fuel quality and separator function; inspect nozzle tip for coke deposits
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →