OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 6 verified suppliers & service companies for HiMSEN in the Maritime Network Find suppliers →
HiMSEN

8L H21/32

Hyundai HiMSEN H21/32 — Marinediesel, Bohrung 210 x Hub 320 mm, 720, 750, 900, 1000 rpm, 800–1800 (depending on cylinder count and speed: 720/750/900/1000 rpm). Brennstoff: Marine Diesel Oil (MDO), Heavy Fuel Oil (HFO) up to 700 cSt @ 50°C. Status: Production: In-service since 2001 (over 5,000 engines delivered by 2011). Tier II and Tier III (with SCR) compliant. Current production status active.. Verifiziert, Datenblatt verlinkt.

2720.0 kW
Power

Engine Specifications

8
Cylinders
210 mm
Bore
320 mm
Stroke
2,720 kW
MCR Power
900.0 rpm
MCR RPM
4-stroke
Stroke Type
Family: HiMSEN (HD Hyundai) H17/28 · Tier: IMO Tier II · Fuel: MDO, MGO

Components & Design

Component data being added…

Technical Data

Compression ratio 17:1
Stroke/Bore ratio 1.52 (320/210)
Max combustion pressure 200 bar
SFOC at 100% MCR 182-187 g/kWh (720-1000 rpm)
Lubricating oil consumption 0.6 g/kWh
Dry weight (5H21/32) 13.4 tons
Dry weight (6H21/32) 15.1 tons
Dry weight (7H21/32) 16.7 tons
Dry weight (8H21/32) 18.4 tons
Dry weight (9H21/32) 19.8 tons
Power per cylinder 160-210 kW/cyl (depending on speed)
Injection pressure 2000 bar maximum
unified from engine model True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Piston cooling nozzle blockage/misalignment: Gasket residue and combustion deposits can clog cooling nozzles, leading to piston crown overheating, expansion, an
Scavenge space fire risk: Blow-past from defective piston rings or worn liners allows combustion products/oil into scavenge space; leaking air cooler can raise
Exhaust valve seat erosion/regression: High combustion temperatures cause valve seat wear; internal clearances tighten as seats erode, reducing flow and increas
Fuel injection nozzle coking: Poor fuel quality and high combustion temperatures cause deposit buildup in injector holes, reducing spray pattern and combustion

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Equipment Model #38161 · ✓ still in production