7L H17/28
Hyundai HiMSEN — Marinediesel, Bohrung 170 x Hub 280 mm, 900-1000 rpm, 575-1080 kW (5-8 cylinders at ~115 kW/cylinder nominal). Brennstoff: Diesel (MDO/MGO), Heavy Fuel Oil (HFO) up to 700 cSt @ 50°C (Uni-Fuel concept). Status: Production (Specialized genset engine series). Verifiziert, Datenblatt verlinkt.
Engine Specifications
Other Cylinder Configurations 33
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Verify fuel supply viscosity (maintain 2-14 cSt). Inspect fuel pump drain line for clogging by fuel oil sludge. Monitor drain hole/groove inside barrel.
Inspect combustion chamber deposits via borescope. Visually inspect turbocharger inlet/outlet for deposit accumulation. Check exhaust manifold for buildup.
Measure crankcase pressure for blow-by indication. Inspect piston rings for freedom of movement. Check cylinder compression via pressure test.
Measure cylinder liner wear (limit 0.4 mm). Inspect flame ring wear (limit 0.2 mm). Perform borescope inspection for scoring/scuffing marks.
Check main bearing and connecting rod bearing clearances at major overhaul. Measure thrust bearing axial clearance. Verify shell thickness specifications.
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →