"> MSA MSA S-CAP EEBD
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
MSA

MSA S-CAP EEBD

The MSA S‑CAP EEBD is a self‑contained emergency escape breathing device that supplies chemically generated oxygen for up to 30 minutes, enabling personnel to evacuate smoke‑filled or toxic atmospheres. The supplied category identifies the equipment as EEBD (Emergency Escape Breathing Device), and it is normally installed in designated fire, rescue, enclosed-space or escape equipment lockers where crew can reach it quickly. In that listed role, its primary purpose is to provide breathing protection for firefighting, rescue, escape or supplied-air work according to the listed type. SCBA, EEBD and airline systems differ in duration, mobility and air source, so cylinders, regulators, hoses and masks must match the approved configuration. The model designation identifies the listed configuration, but no additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. The source metadata also states capacity: 15 min rated, chemical oxygen. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

15 min rated, chemical oxygen
Capacity
Marine Equipment
Medium

Components & Design

Component data being added…

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Cylinder, air-line or connection leakage reduces available air and is identified during pre-use checks
Regulator or demand-valve malfunction causes difficult breathing, free flow or unstable mask pressure
Face-mask seal damage causes inward leakage during the user seal check
Harness, buckle, hose or hood damage makes the unit difficult or unsafe to use
Pressure indication, low-air alarm or supply-control faults prevent reliable awareness of remaining air

Service & Maintenance

Inspect cylinder or air supply, valves, reducers, hoses, demand valve, mask or hood, harness, gauges and alarms as applicable. Confirm cleanliness and readiness after use and maintain charging and inspection controls under the vessel safety program. Functional testing must follow manufacturer and statutory procedures. Refer to the manufacturer documentation for the exact figure for pressure and service intervals.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry approved mask or hood seals, straps, hoses, regulator service items where onboard repair is permitted and compatible cylinders or air-line components according to the vessel safety plan.
Equipment Model #248 · ✓ still in production