Thrust Bearing · Shaft Line Equipment
The RENK Bearings LAZFZ63-550 is a thrust bearing for marine shaft lines. It absorbs the axial thrust from the propeller and transmits it to the ship's structure, using hydrodynamic oil-film sliding surfaces in a housing. It is installed in the thrust block or in the gearbox or shaft line in the engine room and carries DNV type approval.
What our service work and the manufacturer documentation say about keeping this model running.
Monitor bearing temperature and lube oil pressure and temperature continuously, and verify alarm and shutdown set points. At drydock or survey inspect pads, collar and oil supply, and check axial clearance against the maker's limits.
RENK Bearings GmbH: Keep a seal kit and solenoid valves on board. Lead time: 3-8 weeks.
Listed in the DNV Approval Finder at the time we recorded it. The certificate is issued by DNV, not by us; check its current status at DNV.
Free of charge — send us your request for RENK Bearings GmbH equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type.
Tell us what you need for this RENK Bearings GmbH LAZFZ63-550 — a part, a service call, a second opinion. Are you RENK Bearings GmbH? Claim this brand page.
Service engineer? Write the day report for this LAZFZ63-550 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.