⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Omron Industrial
CIP Safety
Description being added…
Components & Design
Component data being added…
Technical Data
Grounding method
Ground to 100 Ω or less
Ambient storage temperature
−25 to 70°C (with no condensation or icing)
Overvoltage category
Category II: Conforms to JIS B3502 and IEC 61131-2.
Isolation method
No isolation: Between the Unit power supply terminal and internal circuit
NX Unit power supply efficiency
80%
Maximum I/O power supply current
4 A
Current consumption from I/O power supply
10 mA max. (24 VDC)
External connection terminals
Screwless clamping terminal block (8 terminals)
Terminal connection diagram
UV/UG: Unit power supply terminalsIOV/IOG: I/O power supply terminals
Number of cascade connections
The built-in switching ports support up to 50 nodes.There is no limitation when an external Ethernet switch is used.
Maximum routable Safety data length per connection
32 bytes
Number of tags per connection (=1 tag set)
32 (31 tags if Controller status is included in the tag set.)
Dimensions
30 × 100 × 71 mm (W × H × D)
I/O power supply method
Not supplied.
Current capacity of I/O power supply terminals
No I/O power supply terminals
NX Unit power consumption
3.35 W max. 2The cable length for the Units (Communication Control Unit and Power Supply Unit for NX Units) that supply power to the corresponding Unit must be up to 20 m.
Weight
130 g max.
Rated input voltage
24 VDC (20.4 to 28.8 VDC)
Number of safety slave connections
1
Safety input OFF voltage/OFF current
5 VDC max., 1 mA max.
Test output type
Sourcing outputs (PNP)
Test output residual voltage
1.2 V max. (Between IOV and all output terminals)
Test output leakage current
0.1 mA max.
Rated voltage
24 VDC (20.4 to 28.8 VDC)
Safety output ON residual voltage
1.2 V max. (Between IOV and all output terminals)
Safety output OFF residual voltage
2 V max. (Between IOG and all output terminals)
Safety output leakage current
0.1 mA max.
source url
https://industrial.omron.eu/en/products/cip-safety
Related equipment 10
Omron Industrial A4EG
same series
Omron Industrial CJ1W-NC_3
same series
Omron Industrial CJ1W-NC_4
same series
Omron Industrial Contact Sensors
same series
Omron Industrial D4ER-N
same series
Omron Industrial Distributed safety control made possible by Sysmac
same series
Omron Industrial E2ER/E2ERZ
same series
Omron Industrial E3NC
same series
Omron Industrial E3ZM-V
same series
Omron Industrial EJ1N
same series
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documents🛠 Manage this equipment in your fleet
Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →🔎 Suppliers & service for this equipment
Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Omron Industrial?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #160866
· ✓ still in production
Need spare parts for this model?
Tell us what you need for this model — we obtain the quotations for you.