Universal C-type Clamp (Standard Throat)

Size3/8" Rod1/2" RodMaterialDuctile iron, hardened steel cup point set screw and locknut.FinishPlain or Zinc Plated (Hot-Dip Galvanized optional)ServiceRecommended for use under roof installations with bar joist or I-Beam type construction, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joist or flange does not exceed 3/4".ApprovalsComplies with Federal SpecificationA-A-1192A (Type 19 & 23), WW-H-171-E (Type 23),ANSI/MSS SP-69 and MSS SP-58 (Type 19 & 23).UL, ULC Listed and FM Approved.How to sizeSize of clamp is determined by size of rod to be used.InstallationFollow recommended set screw torque values per MSS-SP-69.FeaturesThey may be attached to horizontal flanges of structural members in either the top beam or bottom beam positions.Secured in place by a cup-pointed Set Screw tightened against the flange. A Jam Nut is provided for tightening the Set Screw against the Body Casting.Thru tapping of the body casting permits extended adjustment of the threaded rod.Can be used with AF090 or AF090R retaining clip for seismic applications.OrderingSpecify rod size, figure number, name of clamp and finish.