OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Heinen & Hopman

Package Unit HH-PU-3

Heinen & Hopman Package Unit HH-PU-3 — Compact marine package unit (AHU + cooling plant combined) for single-pipe and dual-pipe HVAC systems on ships and offshore platforms..

Components & Design

Component data being added…

Technical Data

airflow m3h 7000–11000
cooling capacity kW 95–135
compressor power kW 26–39
heating capacity kW 70–150
fan motor power kW 5.5–11
motor class IP54 Isolation Class F
dimensions mm 3150 x 1530 x 2080

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Filter inspection and cleaning/replacement: check filter mats (e.g. P15/500) for clogging and differential pressure drop across filter section

Filter inspection and cleaning/replacement: check filter mats (e.g. P15/500) for clogging and differential pressure drop across filter section

Coil inspection: check heating and cooling coils for fouling, corrosion, and fin damage; verify water/refrigerant connections for leaks

Coil inspection: check heating and cooling coils for fouling, corrosion, and fin damage; verify water/refrigerant connections for leaks

Fan and motor check: inspect centrifugal fan blades for corrosion and mechanical wear, check belt tension or direct-drive coupling, verify vibration isolators a

Fan and motor check: inspect centrifugal fan blades for corrosion and mechanical wear, check belt tension or direct-drive coupling, verify vibration isolators and flexible connections

Drain pan and condensate drainage: inspect and clean condensate drain pan and drain lines to prevent microbial growth and blockage

Drain pan and condensate drainage: inspect and clean condensate drain pan and drain lines to prevent microbial growth and blockage

Damper and valve function: verify operation of fresh-air, return-air, and mixing dampers; check actuators and regulating valves for correct positioning

Damper and valve function: verify operation of fresh-air, return-air, and mixing dampers; check actuators and regulating valves for correct positioning

Electrical and controls inspection: check control starter panel, thermostats, hygrostats, solenoid valves, and safety interlocks; verify motor insulation class

Electrical and controls inspection: check control starter panel, thermostats, hygrostats, solenoid valves, and safety interlocks; verify motor insulation class IP54 rating integrity

Refrigerant circuit check (for Package Units HH-PU): verify refrigerant charge (R-407C/R-134a), compressor oil level, condenser and evaporator condition, and ch

Refrigerant circuit check (for Package Units HH-PU): verify refrigerant charge (R-407C/R-134a), compressor oil level, condenser and evaporator condition, and check for leaks

Casing and insulation integrity: inspect unit casing (EN 1886 compliant) for corrosion from salt air, check door seals and access panels, verify thermal insulat

Casing and insulation integrity: inspect unit casing (EN 1886 compliant) for corrosion from salt air, check door seals and access panels, verify thermal insulation (T2/TB2) is intact

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Equipment Model #152207 · ✓ still in production

Need spare parts for this model?

We know 2+ companies supplying Heinen & Hopman PACKAGEUNITHH-PU-3. Tell us what you need — we obtain the quotations for you.

Heinen & Hopman Engineering BV · NetherlandsLeBlanc & Associates, LLC · United States

Wer liefert dieses Teil? 5 Betriebe im Verzeichnis

LeBlanc & Associates, LLC
Houma, United States
✓ autorisiert
Dolphin Marine Engineering & Trading Co., Ltd
China
Galata Ship Supply Inc.
Turkey
HYDRUS ENGINEERING SA
Greece
Winkong Marine Engineering Co., Ltd.
China
Alle Betriebe für Heinen & Hopman ansehen →