Imo Pump - Series 323F Pumps

 

 

Total Pumping Solutions

Imo Products

Imo Pump Resources

 

About Us

/

Products

3-Screw Pumps

Gear Pumps

Navy/Marine Pumps

/

Resources

Parts List Search

Drawings

Brochures & Technical Articles

Service Manuals

Colfax Fluid Handling Pump Selector Program

Downloads

PumpTips
SM

/

Contact Us

U.S. & Candian Reps

Latin Reps

Application Data Form

/

Central
Apps

Central Apps Portal

Parts Search

Order Status

Application Data Form

 

  Imo Products

3-Screw Pumps

3E Series

3G Series

3D Series

6D Series

4SFC Series

4VKC Series

USNP/4PIC Series

12D Series

4U/4T Series

6U/6T Series

8L Series

12L Series

413IC Series

Emtec Series

Tritec Series

C324 Series

T324 Series

323F Series

Gear Pumps

Navy/Marine Pumps

Series 323F

Series 323F is a double suction design providing the highest flow
rates of any three screw pump.  They are found in tank farm services, loading and
unloading terminals, power plants and asphalt process and transfer.

323F

SERIES

Nominal flow rate, GPM/
LPM
, at 300 PSI (20.7 BAR), 200 SSU (43 CST)

SPEED RPM

Size

1150

960

870

720

690

550J

944/
3574

761/
2882

675/
2553

530/
2006

501/
1897

550

1314/
4972

1070/
4048

954/
3611

761/
2882

723/
2736

630M

1728/
6540

1407/
5326

1255/
4750

1002/
3791

951/
3599

800J

3063/
11595

2500/
9463

2233/
8453

1789/
6770

1700/
6433

Series 323F Specifications 

Casing-

  High tensile gray cast iron. Optional steel casing available. A 150 PSIG (10.3 BAR)
steam/hot oil jacket available on steel cased pumps.

Rotor Housing-

Cast gray iron.

Power Rotor-

Alloy steel.

Idler Rotors-

  Pearlitic ductile (nodular) iron.

Gaskets- 
  
   Cellulose and non-asbestos fiber.

Seal & Bearing-

Type P: Alternate rows of hard and soft square molded packing rings.  Type B: Buna N
bellows mechanical seal with carbon on niresist faces.  Type H: Positive drive
mechanical seal with carbon on niresist faces.  Recommended for residual and crude
oils. All types have two internal sleeve bearings.

Accessories-

Completely mounted, built to order pump/driver assemblies are available with baseplates,
ANSI RF spool pieces, etc. 

Outlet Pressure-

300 PSIG (20.7 BAR) maximum. Minimum recommended differential pressure is 40 PSI (2.8
BAR). Consult Imo Pump for higher pressures.

Inlet Pressure-

25PSIG (1.7BAR) maximum.

Viscosity-

  Type P: 100 to 25,000 SSU (20 to 5400 CST). Type B: 50 to 3000 SSU (8 to 650 CST).
Consider cold startup conditions. Type H: 50 to 20,000 SSU (8 to 4300 CST). Consult Imo
Pump for lower or higher viscosity operation. 

Temperature- 
Type
B: 0 to 180°F (-18 to 82°C). Type H and P: 0
to 250°F (-18 to 121°
C) 

Drive-
  
Direct only.

Rotation-

  Clockwise facing pump shaft . 

Mounting-

  Horizontal foot mount Optional vertical mounting available for certain
applications.

Filtration-
  
Inlet strainers are
required to keep contaminants and abrasives out of the pump. They must be selected in
consultation with the strainer vendor to prevent pump starvation. Normally, 60 mesh (0.01
inch- 238 micron) for light and 1/8-3/16 inch (3-5mm) openings for heavy oils are
recommended.
 

Maximum Speed*-

1200 RPM

* Assumes minimum inlet pressure requirements are met.

 

© 1998-2017 CIRCOR Pumps North America, LLC.  All rights reserved.  CIG, GTS, Imo, I-Mag, PumpTips, QuickServe and Warren are trade marks of CIRCOR Pumping Technologies, a subsidiary of 
Circor
.