HC-64A
Hi-Sea Marine HC-64A — Starting ships' engines and auxiliary equipment.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Check intercooler/aftercooler for scaling, corrosion, and proper water/air flow; clean as needed to maintain thermal efficiency
Inspect air intake filters and moisture separators; replace filters if clogged or damaged to prevent system contamination
Verify pressure relief valve operation at rated setpoint; manually test to confirm proper venting under pressure
Examine compressor cylinder head, valve plate, and discharge ports for carbon buildup and valve seat condition; decarbonize if necessary
Check suction and discharge manifold condition; inspect for cracks, corrosion, or loose connections that may affect air delivery
Inspect unloader valve and automatic start/stop mechanism (for diesel-driven emergency units); test solenoid function and spring tension
Measure and record discharge air temperature and oil content; verify air drying and filtration systems are functioning within specification
Inspect belt tension (if belt-driven), bearing condition, and lubrication level; verify proper coupling alignment and vibration levels
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →