SM-30M
Hangzhou Star Marine Technology SM-30M — Starting air compressor for marine diesel engines (main and auxiliary).
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Daily drainage of air receivers to remove accumulated oil and water (critical for preventing combustion hazards)
Inspection of suction and discharge valve plates every 2,000 running hours; replacement every 4,000-8,000 hours
Monitoring and maintenance of lubricating oil levels per manufacturer guidelines, including regular oil and filter changes
Inspection of intake filter for clogging and cleanliness; clean or replace as necessary
Examination of intercoolers and water-cooled systems for fouling or blockage; clean or repair as required
Check for air line leaks and moisture accumulation in compressed air system
Inspection of starting air valves to prevent sticking or leakage (critical to prevent hot exhaust gas backflow)
Verification that cylinder lubrication systems are functioning correctly (check supply from sight glass)
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →