5213
Reavell 5213 — Engine start, large capacity.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Check pressure relief valve and ensure functionality before overpressure safety device
Check oil level and top up as required; oil change every 3-6 months or according to manufacturer's specification
Clean or replace air intake filter; inspect more frequently in damp/dusty conditions
Inspect valves for wear, contamination and carbon deposits; overhaul or replace as required
Inspect belts and coupling for wear, cracks and misalignment and adjust belt tension
Check all hoses, fittings and connections for air and oil leaks
Lubricate bearings on motor and compressor with grease to maintain service life and cooling
Perform vibration and noise control; frequency analysis recommended annually
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →