DB62c
SPX ClydeUnion DB62c — Marine/Cryogenic - Multi-Stage Vertical Turbine.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection for seepage at seal housing; measure seal face gap with feeler gauge; verify seal flush plan lines for blockage or corrosion deposits
Measure bearing temperature with infrared thermometer (acceptable: <120°C); listen for grinding or squealing noise; check bearing grease condition and lubrication level weekly during continuous duty operation
Visual inspection of impeller blade surfaces for pitting or erosion marks; measure impeller clearances to volute; perform ultrasonic thickness measurement on diffuser vanes; check suction line for blockages or air entrainment
Measure radial and axial alignment using dial indicators (tolerance per API 610: radial <0.05mm, axial <0.05mm); inspect coupling bolts for looseness and corrosion; verify coupling guard condition
Visual inspection of pipe exterior for rust or white/green corrosion deposits; check for water hammer or pressure surges; verify strainers are clean (pressure drop <0.5 bar); inspect vent and drain plugs for seawater infiltration
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →