CMB 5-47
Grundfos CMB 5-47 — Domestic freshwater pressure boosting with PM2 manager.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Verify inlet pressure gauge reading does not exceed pump datasheet maximum inlet pressure specification
Check suction line for air leaks, ensure suction lift does not exceed 1 meter, verify intake filter is not clogged
Measure tank pressure with gauge when pump is off; pre-charge pressure typically 0.8-0.9x minimum operating pressure
Monitor outlet pressure gauge continuously; pressure relief valve should activate at maximum rated pressure
Install thermometer on discharge line; verify liquid temperature stays within -20°C to +55°C operating range
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →