STT 60
Schottel STT 60 — TransverseThruster - Lightweight transverse thrust.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual dive inspection or ultrasonic thickness measurement of blade leading edges for erosion, pitting, or cavitation damage indicative of operating outside design envelope
Dismantle controllable-pitch propeller hub, measure all bearing clearances and roughness, check for wear patterns; exchange all internal seals and gaskets
Visual inspection of sacrificial anodes and protective coatings; replace zinc anodes and check hull attachment for galvanic isolation
Verify shaftline re-certification, check flexible coupling bolts for looseness, measure runout and eccentricity of propeller hub to detect misalignment
Sample hydraulic oil for water content and particle count; inspect seal condition around hub oil passages for weeping or active leakage
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →