7M46DF
Caterpillar/MaK 7M46DF — Dual-fuel (LNG/MDO/HFO) inline propulsion for large cruise ships.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Monitor turbocharger bearing temperature (alert >120°C), vibration signatures, and exhaust gas temperature trends. Listen for unusual noise and confirm boost pressure within specification.
Verify fuel temperature in spec range (120-140°C HFO), monitor fuel system pressure (45-70 psi nominal), inspect fuel quality/water content, check fuel injector spray patterns and atomization.
Check main bearing oil pressure (32-47 psi low load, 50-70 psi full load), monitor oil temperature, verify oil level and cleanliness via particle counts. Inspect bearing deflections during normal operation.
Record exhaust gas temperatures on all cylinders (should be within ±5% between cylinders). High EGT indicates fuel injection timing issues, carbon deposits, or air leak. Compare trend data against baseline.
Monitor cooling water flow rate and temperature (jacket water outlet 50-55°C typical). Check for scale buildup, verify thermostat function, inspect for leaks. Verify cooler effectiveness and bypass valve operation.
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →