TMS-100D
Taiko Kikai TMS-100D — Cooling Fresh Water Pump.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection and tactile inspection of mechanical seal surfaces during overhaul for evidence of contact damage or deterioration
Visual inspection of impeller vane surfaces and casing walls for evidence of cavitation erosion, pitting, or abrasive wear patterns indicating inadequate suction conditions or fluid quality issues
Monitor and record bearing temperatures, verify lubricant level, clarity and viscosity; review historical vibration and temperature trends for unusual increases indicating potential bearing failure
Record suction pressure daily in multi-pump systems; monitor for unexplained pressure drops or increases indicating blockage, air entrainment, or inadequate inlet conditions
Verify pump inlet is never isolated or starved of liquid during operation; ensure discharge check valves function properly and inlet strainer is not plugged
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →