CDX
Ebara CDX — Cooling water, single impeller stainless.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Confirm 304 vs 316/316L material for seawater applications (316L required for marine use per ASME/ISO); examine nameplate and casing stampings
Visual inspection for erosion/corrosion damage, cavitation pitting, impeller balance verification; measure with calipers against design drawings
Check seal orientation (SiC/Carbon/EPDM standard); verify proper cooling/flushing for freshwater vs seawater; monitor leakage rate (<1 drop/min acceptable)
Check axial/radial play (shall-not-exceed limits per ISO 1101); ultrasonic vibration signature analysis; oil condition testing for bearing health
Verify pump rated pressure matches system requirements (typically 10-16 bar for Ebara cooling); confirm temperature rating matches liquid (±120°C max standard)
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →