TSP-50
Teikoku TSP-50 — Marine cooling water pump.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Verify inlet/outlet connections patent, measure cooling water flow against manufacturer spec, check for mineral deposits/fouling in freshwater systems or biological growth
Monitor bearing temperature using integrated TRG meter without disassembly, listen for abnormal noise/vibration, ensure cooling water supply adequate per design parameters
Inspect motor-pump boundary for any fluid seepage, check seal material compatibility with pumped liquid, verify no cracks in non-magnetic metal boundary plate from thermal cycling
Measure radial and axial clearances with dial indicator, check for white/brown salt crusts on seawater units, verify no mechanical binding on rotor spin-check, compare to baseline clearances
Inspect coupling surfaces, shaft sleeves, and connection hardware for corrosion pitting, verify protective zinc anodes/sacrificial metals functional, check stainless steel grade (must be austenitic 316 for marine)
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →