HG-200
Taiko Kikai HG-200 — Lube Oil & Fuel Oil Transfer.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection for scoring, pitting, chipping on gear teeth; measure gear backlash and contact surface wear using dial indicators; check for discoloration indicating overheating
Check for abnormal noise/vibration during operation; inspect for corrosion, spalling, or surface damage on roller/sliding bearings; verify bearing clearances per specification; temperature monitoring
Monitor leakage rate (acceptable: ~1 drop/second); inspect seal faces for wear, scoring, or hardening; check gasket compression and condition; pressure test at operating parameters
Verify oil viscosity matches pump specification (check manufacturer datasheet); test for water contamination, oxidation products, and particle count per ISO 4406; change intervals per maintenance schedule
Conduct pressure test at rated conditions; measure actual flow rate vs. specification; check for abnormal pressure drops indicating internal leakage; performance verification under loaded operation
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →