OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Navigation› Radar & ECDIS› Radar› JRC JMR-5410-7 X-Band Radar

JMR-5410-7 X-Band Radar

Radar · Radar & ECDIS

Class-certified type (DNV register) · technical data sheet not yet verified
25 kWPower

The JRC JMR-5410-7 X-Band Radar is a marine radar system. It is normally installed on the bridge with scanner mounted high on a mast or radar platform. It is designed for target detection, collision-avoidance support and navigation in restricted visibility. The operating principle relies on radio-frequency transmission and echo processing to display target range and bearing. Compared with neighbouring models, the relevant differences are frequency band, antenna size, transmitter technology, display integration and tracking functions; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on scanner rotation, target presentation, heading/speed inputs, antenna/RF path, alignment and power. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

BandX
Power (kW)25
IMO CompliantYes
ArpaYes
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Check scanner rotation, target detection, gain/clutter controls, heading and speed inputs, range/bearing alignment and known-target presentation where practicable. Inspect scanner, pedestal, RF path, seals and structural mounting. Verify performance-monitor functions where fitted, blind-sector information and bridge power supplies.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry fuses, selected cooling fans, display/control components, interface converters and manufacturer-recommended transmitter or scanner spares appropriate to the radar technology. Keep weather seals, RF connectors and approved maintenance consumables.

Need this part?

Request a quote for this model.

Free of charge — send us your request for JRC equipment. Our team checks it and replies by e-mail.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we can check availability and prices faster; without them we may have to ask first, which can cost a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Radar.

Other models of the same equipment type, JRC first.

By manufacturer FurunoJRCAlphatronRaytheon AnschuetzKodenSperry MarineTokyo KeikiKongsbergSimradWärtsiläKelvin HughesNavico RBU ItaliaRaymarineGEM ElettronicaTermaAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All JRC models More like JMR-5410-7 X-Band Radar
Would you like to know more?

A person reads every request and replies by e-mail.

Tell us what you need for this JRC JMR-5410-7 X-Band Radar — a part, a service call, a second opinion. Are you JRC? Claim this brand page.

Service engineer? Write the day report for this JMR-5410-7 X-Band Radar in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.