OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Navigation› Radar & ECDIS› ECDIS› JRC JAN-9201 ECDIS

JAN-9201 ECDIS

ECDIS · Radar & ECDIS

Class-certified type (DNV register) · technical data sheet not yet verified

The JRC JAN-9201 ECDIS is an electronic chart display and information system. It is normally installed at the bridge navigation console with position/heading/speed interfaces. It is designed for route planning and route monitoring using approved electronic chart data. The operating principle relies on integration of ENC chart data with real-time navigation sensor inputs and alarms. The supplied entry gives no additional verified capacity, pressure, power or dimensional figure for this model. Compared with neighbouring models, the relevant differences are hardware/software generation, sensor/network interfaces and backup architecture; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on chart permits/updates, route checks, sensor inputs, alarms, backup and power. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Every value below comes from the manufacturer datasheet or class-society record on file for this model.

Display size in23.1
IMO CompliantYes
Chart formatS-57/S-63
Related models

Also in ECDIS.

Other models of the same equipment type, JRC first.

Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Service notes

Verify chart permits and update status, sensor inputs, route-check and route-monitor functions, safety settings and alarm operation. Check backup ECDIS or alternative chart arrangement, power supply, UPS and data-network integrity. Review installed software and chart status against vessel procedures.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry manufacturer-recommended computer/display spares, approved storage media, cooling fans, power-supply or UPS components and common network/interface hardware. Maintain a workable backup navigation arrangement independently of spare parts.

Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for JRC equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokEndress+HauserAlfa Laval S.p.A.MAN Energy SolutionsWärtsiläABB MarineAlfa LavalMacGregorNovenco MarineseimihanlaimsDESMICarrier MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All JRC models More like JAN-9201 ECDIS
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this JRC JAN-9201 ECDIS — a part, a service call, a second opinion. Are you JRC? Claim this brand page.

Service engineer? Write the day report for this JAN-9201 ECDIS in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.