"> Crowcon Gas-Pro TK Pump-C
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for Crowcon in the Maritime Network Find suppliers →
Crowcon

Gas-Pro TK Pump-C

Crowcon Gas-Pro TK Pump-C is a portable marine gas detector. It is normally installed with crew performing enclosed-space entry, cargo, maintenance or emergency duties. Its primary purpose is to provide personal or area indication of hazardous gas or oxygen conditions at the point of work. Compared with fixed detection, a portable detector moves with the operator and depends on correct pre-use testing, sensor condition, battery charge and sampling practice. The supplied record already contains the available concise model or rating information, so those existing figures are not duplicated here and no additional meaning is inferred from the model code. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

sampling method Pump

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Sensor ageing, poisoning or contamination causes drift, slow response or calibration failure
Low battery or charging faults cause unexpected shutdown or inability to complete a work period
Blocked pump, filter or sampling hose on pumped units causes low-flow alarms or delayed response
Water, dirt or impact damage causes intermittent readings, damaged display or failed controls
Incorrect calibration or sensor configuration produces misleading readings or repeated alarms

Service & Maintenance

Perform the approved pre-use check, bump test and calibration and inspect sensor inlets, pump, hose, battery, display and casing. Confirm the detector is suitable for the gases expected in the task. Review alarm and calibration status before enclosed-space use. Exact alarm settings and calibration gas values require approved documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry filters, sampling hoses, pump parts where fitted, charging equipment, sensor cartridges where user-replaceable and approved calibration accessories.
Equipment Model #140953 · ✓ still in production