"> DSB Marine DSB Marine SOLAS-A 4P Standard-Service-C
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
DSB Marine

DSB Marine SOLAS-A 4P Standard-Service-C

DSB Marine DSB Marine SOLAS-A 4P Standard-Service-C is identified in the source list as a inflatable life raft (solas-a). It is stowed on deck at an approved survival-craft station in a container, cradle, valise or launching arrangement appropriate to the raft type. Its purpose is to provide emergency flotation, shelter and survival equipment for persons abandoning the vessel. The source record provides no additional model-specific operating figure beyond the listed designation and category. The approved capacity, equipment pack, launching method, inflation system and servicing requirements are specific to the certified raft. The exact model designation and source capacity distinguish approved occupancy and launching arrangement from neighboring life rafts; refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

capacity persons 4
service interval Standard-Service

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Container, valise or securing damage caused by weather, impact or poor stowage, resulting in visible deterioration or compromised deployment readiness
Inflation-system leakage or cylinder problems caused by corrosion, seal deterioration or servicing defects, resulting in failed or incomplete inflation
Fabric, seam or valve deterioration caused by age, ultraviolet exposure or contamination, resulting in leakage or loss of buoyancy
Hydrostatic-release or weak-link problems where fitted caused by expiry, incorrect installation or corrosion, resulting in unreliable float-free release
Davit or launching-attachment defects where applicable caused by corrosion, wear or incorrect rigging, resulting in difficulty launching the raft safely

Service & Maintenance

Inspect external condition, securing, painter arrangement, cradle and launching access without opening a sealed raft that requires approved shore servicing. Check service and release-unit dates and verify identification and capacity markings remain legible. Inspect davit hooks or lifting points where the raft is designed for davit launching. Keep embarkation and launching areas clear and ensure operating instructions are available. Any sealed-container opening, inflation-system work or internal equipment inspection should follow the approved service-station regime. Refer to the manufacturer documentation for the exact figure for service intervals and replacement criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Onboard spares are normally limited to approved securing items, release units where permitted, signage and launching-arrangement consumables rather than internal raft components. Internal survival equipment, cylinders, valves and fabric repairs belong within the approved servicing system. Use only parts and service stations accepted for the certified raft.
Equipment Model #140146 · ✓ still in production