"> Fassmer Fassmer FRB 4P 8kts-C
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 7 verified suppliers & service companies for Fassmer in the Maritime Network Find suppliers →
Fassmer

Fassmer FRB 4P 8kts-C

Fassmer Fassmer FRB 4P 8kts-C is a SOLAS-type lifeboat or rescue craft. It is normally installed at an assigned embarkation and launching station with its approved davit, release gear or free-fall arrangement. Its primary purpose is to provide protected evacuation or rescue capability during abandonment and emergency response. Totally enclosed, free-fall and rescue-boat designs differ in launching arrangement and operating role, while the supplied record does not define every hull, engine or release-system detail of this model. The supplied record already contains the available concise model or rating information, so those existing figures are not duplicated here and no additional meaning is inferred from the model code. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

capacity persons 4
speed kts 8
type Fast Rescue Boat

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Engine, battery or fuel-system deterioration causes difficult starting or failure to run during drills
Release-hook, linkage or interlock wear causes stiff operation, incorrect indication or unsafe release behaviour
Hull, canopy, window or seal damage causes water ingress, corrosion or reduced weathertight integrity
Steering or propulsion faults cause poor manoeuvrability, abnormal vibration or loss of thrust
Inventory, securing or communication-equipment deficiencies are noticed during drills or statutory inspection

Service & Maintenance

Inspect hull, canopy, drains, engine, batteries, fuel, steering, propeller or jet, release gear, hooks, falls interface, seating and required equipment. Run the engine and test steering and release functions strictly under approved procedures. Review maintenance and statutory service records. Exact load, release and maintenance criteria require manufacturer and SOLAS-approved documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry engine filters and belts as applicable, battery support items, fuel-system consumables, propeller or drive service items, approved release-gear spares where permitted, drain plugs, lights and inventory consumables.
Equipment Model #139971 · ✓ still in production