"> Carlisle & Finch Carlisle & Finch Searchlight 1000W-C
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Is Carlisle & Finch your company? Claim this page
Carlisle & Finch

Carlisle & Finch Searchlight 1000W-C

Carlisle & Finch Carlisle & Finch Searchlight 1000W-C is identified in the source list as a searchlight. It is normally installed or arranged in the approved navigation-light or searchlight position. Its purpose is to provide the listed visual signal or directed illumination. The source record provides no additional model-specific operating figure beyond the listed designation and category. The equipment is based on light source, optics, housing, mounting, power and monitoring. The exact model designation distinguishes the installed configuration from neighboring variants in the same category; refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

power w 1000

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Lamp or LED-module failure caused by component aging or electrical fault, resulting in loss of the required light or a monitoring alarm
●Lens or optical-surface contamination caused by salt, dirt or paint, resulting in reduced visible intensity
●Water ingress caused by seal, gland or housing damage, resulting in corrosion, short circuits or intermittent operation
●Power or monitoring-circuit fault caused by wiring, fuse or panel problems, resulting in loss of illumination or false alarm
●Mounting, sector or aiming error caused by mechanical damage or maintenance work, resulting in incorrect light direction or obstruction

Service & Maintenance

Inspect the light fitting, lens, seals, mounting, cable glands and unobstructed field of view. Function-test the light and any bridge failure indication using the vessel's approved procedure. Replace lamps or modules only with approved components that preserve intended optical performance. Check backup supply arrangements where fitted and verify labeling at the relevant panel. Prevent paint or structural changes from obstructing required sectors. Refer to the manufacturer documentation for the exact figure for installation, aiming and servicing requirements.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep approved replacement lamps or LED modules where serviceable, fuses, seals, cable glands and selected monitoring-panel components. Spare complete fittings may be appropriate for critical or exposed positions.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Carlisle & Finch?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #136257 · ✓ still in production