OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Navigation› GMDSS› VHF Radio› Zenitel AlphaCom Marine-C
Zenitel

AlphaCom Marine-C

VHF Radio · GMDSS

Class-certified type (DNV register) · technical data sheet not yet verified

The Zenitel AlphaCom Marine-C is a marine VHF radiotelephone. It is normally installed at the bridge radio console with its antenna high on the vessel. It is designed for ship-to-ship, ship-to-shore, port and safety voice communication. The operating principle relies on radio-frequency voice transmission and reception in the VHF marine band. The supplied entry gives no additional verified capacity, pressure, power or dimensional figure for this model. Compared with neighbouring models, the relevant differences are control layout, remote stations, approval configuration and antenna arrangement; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on transmit/receive performance, audio, antenna/feeder condition and normal/emergency power. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Every value below comes from the manufacturer datasheet or class-society record on file for this model.

TypeMarine Intercom/PA System
Related models

Also in VHF Radio.

Other models of the same equipment type, Zenitel first.

Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Service notes

Carry out the permitted operational/self-tests, inspect antennas, feeders, connectors, controls and cooling, and verify normal and emergency power where required. Check vessel identity, position and interfaces appropriate to the equipment type and review recurring alarms or logbook entries. A radio surveyor should confirm the installation and programmed data against the approved radio documentation.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry fuses, approved handsets/microphones or control accessories where applicable, antenna connectors and feeder repair items, selected power-supply components and manufacturer-recommended interface/control spares. The spare scale should match the vessel's declared GMDSS maintenance method.

Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for Zenitel equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokEndress+HauserAlfa Laval S.p.A.MAN Energy SolutionsWärtsiläABB MarineAlfa LavalMacGregorNovenco MarineseimihanlaimsDESMICarrier MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like AlphaCom Marine-C
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this Zenitel AlphaCom Marine-C — a part, a service call, a second opinion. Are you Zenitel? Claim this brand page.

Service engineer? Write the day report for this AlphaCom Marine-C in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.