OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 128 verified suppliers & service companies for Furuno in the Maritime Network Find suppliers →
Furuno

Furuno AIS Class A IMO-C

Furuno Furuno AIS Class A IMO-C is identified in the source list as a GMDSS ais transponder. It is normally installed on the bridge, radio station or designated communications area with the antennas, power supplies and backup arrangements required for the vessel's GMDSS installation. Its purpose is to support maritime distress, safety and operational communications using the communications service indicated by the equipment category. The existing database record provides no additional model-specific operating figure beyond the listed designation and category. The exact frequency coverage, satellite service, DSC capability, antenna arrangement and regulatory approval depend on the installed model. The exact model designation identifies communication service, interfaces and approved functions; these must be confirmed from the radio survey records and manufacturer documentation.

Components & Design

Component data being added…

Technical Data

installation Class A IMO

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Antenna, feeder or tuning fault caused by corrosion, damaged cabling or poor connections, resulting in weak transmission, reception problems or equipment alarms
Power-supply or backup-battery failure caused by charger defects, aged batteries or wiring faults, resulting in loss of availability when main power is removed
Transmitter or receiver failure caused by RF-component or electronic faults, resulting in inability to establish communications or receive expected traffic
Position or time-input failure caused by GNSS or network faults, resulting in missing or incorrect data in distress or DSC functions
Control, display or software fault caused by hardware failure or configuration problems, resulting in frozen controls, error messages or unavailable functions

Service & Maintenance

Perform operational and self-tests permitted by the vessel's procedures without generating unintended distress alerts. Inspect antennas, feeders, grounding, power supplies, backup batteries and connected navigation-data inputs. Verify station identity, position input, time and configured communication services against approved records. Check printers, handsets, microphones and alarm interfaces where fitted. Maintain software, licenses and service subscriptions required by the installed system. Refer to manufacturer and regulatory documentation for exact test methods, battery criteria and approved servicing.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep fuses, handset or microphone accessories, printer consumables where applicable, selected power-supply components and manufacturer-recommended electronic spares. Antenna or feeder repair materials and backup-battery arrangements should reflect the vessel's redundancy plan. Preserve type approval and programmed identity when replacing core units.
Equipment Model #135921 · ✓ still in production

Wer liefert dieses Teil? 178 Betriebe im Verzeichnis · 9 aus Herstellerlisten

Aqua Marine Electronics
Piraeus, Greece
✓ autorisiert
Avatec Marine BV
Dalweg 3B 3233 KK Oostvoorne Rotterdam, Netherlands
✓ autorisiert
Bluetek Supply
Miami, United States
✓ autorisiert
Furuno Italia S.r.l.
Gatteo, Italy
✓ autorisiert
HORA ELEKTRONIK d.o.o.
A.B. Simica 65, Croatia
✓ autorisiert
JN TAYLOR & CO. PTY LTD
Australia
✓ autorisiert
Lammers Schiffselektronik GmbH
Leer, Germany
✓ autorisiert
RADIO HOLLAND EGYPT
Alexandria, Egypt
✓ autorisiert
Alfa International (Marine Electronics)
Karachi, Pakistan
Marine Technics Baltia OÜ
Tallinn, Estonia
Navtronics
Marbella, Spain
Scan Marine Inc.
Tondo, Manila, Philippines
Weitere aus Hersteller- und Marktplatzverzeichnissen:
C. Sahamongkol Engineering Ltd., Part. · ThailandFuruno Danmark · DenmarkFuruno Norge A/S · NorwayMarine Communications MARCOM · Trinidad And TobagoOzsay Bulgaria Marine Electronics Ltd. · BulgariaProesa Electronica | Marine Electronics & Solutions · MexicoQueens Radio Electronics Marine Pte. Ltd. · Sri LankaMosaic Business Corporation · CameroonSeacom Marine (B) Sdn Bhd · Brunei Darussalam
Alle Betriebe für Furuno ansehen →