"> KVH Industries KVH Industries VSAT Ku-Band 240cm-C
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
KVH Industries

KVH Industries VSAT Ku-Band 240cm-C

KVH Industries KVH Industries VSAT Ku-Band 240cm-C is a shipboard unit in the GMDSS group, classified in the source as Inmarsat Terminal. It is normally installed on the bridge or designated radio console with antennas and external communication equipment mounted in suitable positions. Its primary duty is to provide maritime distress, safety and operational communications through the installed satellite or radio service. In service it interfaces with antennas, GNSS where fitted, distress controls, power and reserve supply, printers/terminals and ship communication networks. Compared with neighboring entries in the same product family, this record is the exact KVH Industries KVH Industries VSAT Ku-Band 240cm-C variant; the model designation should be retained unchanged when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

antenna diameter cm 240
band Ku-Band
stabilized True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Antenna or RF/cabling fault, typically indicated by loss of link, weak signal or communication alarm
Power-supply/reserve battery failure, typically indicated by terminal shutdown or reserve-power alarm
Terminal software/network fault, typically indicated by registration failure, frozen interface or loss of messaging
GNSS/time input fault where used, typically indicated by missing position in distress data or navigation-data alarm
Connector corrosion or water ingress, typically indicated by intermittent communication or high RF loss

Service & Maintenance

Check self-tests, distress controls under approved test mode, antenna/cables, reserve power, registration/status, GNSS input and communication logs; avoid unintended distress transmissions.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep fuses, power-supply components, handset/keyboard peripherals, approved cables/connectors and critical terminal interface parts; reserve batteries should meet the installed radio plan.
Equipment Model #135897 · ✓ still in production