eGlobe ECDIS G3
ChartWorld eGlobe ECDIS G3 is a marine radar in the supplied category 'Radar & ECDIS / ECDIS'. It is normally installed on the bridge, with a scanner mounted in a clear position above deck. It is intended to detect and track targets and coastline using radio-frequency echoes for collision avoidance and navigation. Compared with neighbouring entries in the same series, the supplied list identifies this unit by its model designation; the meaning of any embedded size or rating code should be confirmed in manufacturer documentation. In service it interfaces with navigation sensors, bridge displays, ship power supply, data networks and alarms relevant to the equipment function. Model-specific limits, settings, dimensions and acceptance criteria that are not stated in the supplied data should be taken from the manufacturer documentation.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Check power supplies, data interfaces, alarms, sensor health and agreement with independent navigation information where practical. Inspect external antennas, scanners or transducers as applicable and review fault logs and self-test results. Verify required backups, records and bridge procedures; exact calibration tolerances and test methods must follow manufacturer and statutory documentation.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →