Radar · Radar & ECDIS
Sperry Marine VM FT Mk3 Nav Conning is listed in the source as a marine Radar within the Radar & ECDIS group. Equipment of this type is typically installed on the bridge, with the antenna or scanner arranged in a clear position above deck and the operator equipment at the navigation console. Its primary duty is surface-target detection, collision-avoidance support and navigation awareness, and it relies on the sensor or scanner, signal processing, heading and position inputs, display functions and shipboard power working as one chain. Neighboring variants can differ in rating, size, interface, approval basis or arrangement, so the complete model designation and actual nameplate data are important for identification. It normally interfaces with ship power, heading input, position data, speed data and bridge alarms or network interfaces as fitted. For any exact capacity, pressure, voltage, tolerance, wear limit or setting not stated in the source, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Sperry Marine first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect scanner or antenna condition, cable entries, connectors, cooling paths, power supplies and bridge interfaces. Verify that heading, position and speed inputs are valid and that built-in alarms and test functions behave correctly. Check configuration and performance against the vessel's approved records and refer to the manufacturer documentation for exact test limits.
Carry the maker-recommended consumables and critical replaceable items appropriate to the installed configuration, such as fuses, filters, fans, interface modules, approved connectors and other line-replaceable units where the vessel's maintenance plan requires them.
Free of charge — we forward your request to qualified suppliers for Sperry Marine equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Sperry Marine VM FT Mk3 Nav Conning — a part, a service call, a second opinion. Are you Sperry Marine? Claim this brand page.
Service engineer? Write the day report for this VM FT Mk3 Nav Conning in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.