"> Dräger Drager PSS Merlin 6L 300bar-B
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for Dräger in the Maritime Network Find suppliers →
Dräger

Drager PSS Merlin 6L 300bar-B

Dräger Drager PSS Merlin 6L 300bar-B is a shipboard unit in the Breathing Apparatus group, classified in the source as Self-Contained Breathing Apparatus (SCBA). It is normally installed at fire stations, emergency lockers, machinery-space escape routes or designated rescue-equipment stations. Its primary duty is to provide breathable air for firefighting, rescue, confined-space entry or emergency escape depending on the apparatus type. In service it interfaces with cylinder or airline supply, pressure reducer, demand valve, facepiece/hood, harness and low-pressure warning devices. Compared with neighboring entries in the same product family, this record is the exact Dräger Drager PSS Merlin 6L 300bar-B variant; the model designation should be retained unchanged when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

cylinder 6L 300bar
marine approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Cylinder pressure loss or valve leakage, typically indicated by reduced indicated pressure or failed leak check
Facepiece/hood seal deterioration, typically indicated by poor face seal, leakage or failed fit/function check
Demand valve or regulator contamination/wear, typically indicated by hard breathing, free flow or unstable pressure
Hose or connector damage, typically indicated by air leakage or restricted supply
Warning device or gauge fault, typically indicated by incorrect pressure indication or absent low-pressure alarm

Service & Maintenance

Inspect cylinder condition and pressure, valves, regulators, hoses, facepiece/hood, harness and warning devices; perform leak and functional checks and observe approved cylinder/service intervals.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep masks/hoods as approved, seals, hoses, demand-valve/regulator service kits, batteries where fitted and replacement cylinders or charged units according to the vessel's safety plan.
Equipment Model #135264 · ✓ still in production