"> Dräger Drager PSS BG4 Plus 6L 300bar-B
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for Dräger in the Maritime Network Find suppliers →
Dräger

Drager PSS BG4 Plus 6L 300bar-B

Dräger Drager PSS BG4 Plus 6L 300bar-B — Breathing Apparatus. The supplied category identifies the equipment as Self-Contained Breathing Apparatus (SCBA), and it is normally installed in designated fire, rescue, enclosed-space or escape equipment lockers where crew can reach it quickly. In that listed role, its primary purpose is to provide breathing protection for firefighting, rescue, escape or supplied-air work according to the listed type. SCBA, EEBD and airline systems differ in duration, mobility and air source, so cylinders, regulators, hoses and masks must match the approved configuration. Within the supplied list, neighbouring variants are distinguished by their model designations and naming, while the source does not state further model-specific hardware differences. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

cylinder 6L 300bar
marine approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Cylinder, air-line or connection leakage reduces available air and is identified during pre-use checks
Regulator or demand-valve malfunction causes difficult breathing, free flow or unstable mask pressure
Face-mask seal damage causes inward leakage during the user seal check
Harness, buckle, hose or hood damage makes the unit difficult or unsafe to use
Pressure indication, low-air alarm or supply-control faults prevent reliable awareness of remaining air

Service & Maintenance

Inspect cylinder or air supply, valves, reducers, hoses, demand valve, mask or hood, harness, gauges and alarms as applicable. Confirm cleanliness and readiness after use and maintain charging and inspection controls under the vessel safety program. Functional testing must follow manufacturer and statutory procedures. Refer to the manufacturer documentation for the exact figure for pressure and service intervals.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry approved mask or hood seals, straps, hoses, regulator service items where onboard repair is permitted and compatible cylinders or airline components according to the vessel safety plan.
Equipment Model #135262 · ✓ still in production