"> Dräger Drager PSS 3000 6L 300bar-B
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for Dräger in the Maritime Network Find suppliers →
Dräger

Drager PSS 3000 6L 300bar-B

Dräger Drager PSS 3000 6L 300bar-B is listed as a marine self-contained breathing apparatus (scba) in the Breathing Apparatus / Self-Contained Breathing Apparatus (SCBA) category. Equipment of this class is typically installed at designated fire lockers, escape stations, rescue locations, or as portable equipment assigned to trained personnel. Its shipboard purpose is to provide breathable air independent of the surrounding atmosphere during firefighting, rescue, enclosed-space entry, or emergency escape. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. No additional verified rating, capacity, weight, dimension, or other model-specific figure is supplied in the structured source data. Any differences from adjacent models in the same family, including rating, size, material, control, certification, or accessory differences not explicitly listed here, should be confirmed in the manufacturer documentation.

Components & Design

Component data being added…

Technical Data

cylinder 6L 300bar
marine approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Cylinder pressure loss from leakage or inadequate charging reduces available breathing-air reserve
Face-mask, hose, regulator, demand valve, or seal damage causes leakage, poor fit, or difficulty maintaining positive pressure
Harness, buckle, backplate, or carrying-frame damage impairs secure use and mobility
Gauge, alarm whistle, electronic monitor, or reducer faults cause incorrect pressure indication or missing low-pressure warning
Contamination, moisture, or poor storage degrades hygienic condition and can make valves or connectors stiff

Service & Maintenance

Check cylinder charge and test status, mask and seals, regulator and demand valve, hoses, warning device, gauge, harness, connections, cleanliness, and stowage accessibility. Functional testing, cylinder filling, and pressure limits must follow approved breathing-air and manufacturer procedures.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep approved mask seals, hoses, demand-valve service items, batteries where fitted, O-rings, straps, and replacement cylinders or cylinder valves through authorized servicing.
Equipment Model #135259 · ✓ still in production