"> Global Davit Global Davit Rescue Boat SWL-20t-B
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for Global Davit in the Maritime Network Find suppliers →
Global Davit

Global Davit Rescue Boat SWL-20t-B

Global Davit Global Davit Rescue Boat SWL-20t-B is listed as a marine rescue boat davit in the Davits / Rescue Boat Davit category. Equipment of this class is typically installed on the boat deck or survival-craft embarkation area beside the lifeboat, rescue boat, raft, or other craft it serves. Its shipboard purpose is to support, launch, recover, or position survival craft or rescue equipment in a controlled manner. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. No additional verified rating, capacity, weight, dimension, or other model-specific figure is supplied in the structured source data. Any differences from adjacent models in the same family, including rating, size, material, control, certification, or accessory differences not explicitly listed here, should be confirmed in the manufacturer documentation.

Global Davit Global Davit Rescue Boat SWL-20t-B

Components & Design

Component data being added…

Technical Data

swl t 20
solas approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Brake wear, contamination, or poor adjustment causes load creep, excessive lowering speed, or inability to hold the suspended craft
Wire rope, sheave, drum, bearing, or hook wear from corrosion and load cycling produces broken wires, noise, poor reeving, or increased play
Hydraulic or electrical drive faults cause slow movement, failed recovery, or inability to slew or luff where fitted
Limit switch, interlock, release, or remote-control faults prevent launching or recovery sequences or cause nuisance stops
Structural corrosion, cracked welds, loose foundations, or seized pivots from weather exposure impair safe movement and load support

Service & Maintenance

Inspect structure, foundations, falls, sheaves, winch, brake, hooks and releases, limit devices, hydraulic or electrical drives, lubrication, corrosion, and emergency/manual operation. Testing, dynamic loads, brake settings, and release maintenance must follow SOLAS, class, flag, and manufacturer requirements.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry approved brake and seal items, wire-rope or fall accessories where permitted, limit switches, hydraulic hose or seal parts, control relays or solenoids, and fastening or lubrication items recommended for the appliance.
Equipment Model #134865 · ✓ still in production