"> Global Davit Global Davit Freefall SWL-5t-B
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for Global Davit in the Maritime Network Find suppliers →
Global Davit

Global Davit Freefall SWL-5t-B

Global Davit Global Davit Freefall SWL-5t-B is listed in the source as a marine Freefall Davit within the Davits group. Equipment of this type is typically installed on deck or at the vessel's working, mooring, launching or cargo-access area, with foundations and machinery integrated into the ship structure. Its primary duty is the lifting, handling, mooring, towing or access duty associated with the Freefall Davit, and it combines the drive system, brakes or holding devices, mechanical transmission, structural components and local or remote controls to move and secure the intended load. Neighboring variants can differ in rating, size, interface, approval basis or arrangement, so the complete model designation and actual nameplate data are important for identification. It normally interfaces with hydraulic or electrical power as fitted, local and remote controls, limit or safety devices, alarms and the vessel's supporting structure. For any exact capacity, pressure, voltage, tolerance, wear limit or setting not stated in the source, refer to the manufacturer documentation for the exact figure.

Global Davit Global Davit Freefall SWL-5t-B

Components & Design

Component data being added…

Technical Data

swl t 5
solas approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Hydraulic leakage, contamination or pressure loss caused by worn seals, damaged hoses or pump faults can produce slow movement, reduced force or visible oil leakage
Brake or holding-device wear caused by friction, contamination or incorrect adjustment can lead to slipping, poor holding or abnormal stopping behavior
Wire, chain, sheave, drum, bearing or pin wear caused by corrosion, overload or inadequate lubrication can show as noise, rough motion, deformation or visible damage
Limit switch, sensor or control faults caused by damaged wiring, misalignment or moisture can produce inhibited motions, nuisance trips or loss of safety functions
Structural corrosion, cracking or loose foundation fasteners caused by cyclic loading and marine exposure can appear as movement, coating breakdown or visible defects around load paths

Service & Maintenance

Inspect load-bearing structure, foundations, pins, sheaves, ropes or chains, brakes, hydraulic or electrical drives and all safety interlocks relevant to the installed arrangement. Check for leakage, corrosion, abnormal wear and smooth operation without bypassing protective functions. Use the maker's documentation, class rules and the vessel's lifting or maintenance records for exact limits and test loads.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Typical onboard spares include seals, hose and fitting items, filters, brake consumables, limit switches, control relays, lubricants and approved rope or chain accessories as applicable to the installed machinery.
Equipment Model #134615 · ✓ still in production