"> Alphatron Marine AlphaBNWAS
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 9 verified suppliers & service companies for Alphatron Marine in the Maritime Network Find suppliers →
Alphatron Marine

AlphaBNWAS

Alphatron Marine AlphaBNWAS is a shipboard unit in the Navigation & Bridge Equipment group, classified in the source as Bridge Camera / CCTV. It is normally installed on the bridge, bridge wings, mast or dedicated navigation equipment racks depending on the sensor or recorder type. Its primary duty is to provide navigation data, target information, environmental information or voyage recording required for safe bridge operations. In service it interfaces with GNSS, gyro, speed log, AIS, radar/ECDIS, microphones/cameras, bridge networks, power supplies and alarm systems depending on the equipment. Compared with neighboring entries in the same product family, this record is the exact Alphatron Marine AlphaBNWAS variant; the model designation should be retained unchanged when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

type BNWAS
imo compliant True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Sensor, antenna or transducer fault, typically indicated by missing, unstable or implausible navigation data
Power-supply or processor failure, typically indicated by blank display, rebooting or unavailable function
Network/interface fault, typically indicated by missing data on connected bridge systems or communication alarms
Cable/connector corrosion or water ingress, typically indicated by intermittent operation or signal loss
Recording/storage or software fault on recorder-type equipment, typically indicated by data gaps, recording alarms or failed playback

Service & Maintenance

Check self-tests, sensor/transducer condition, data interfaces, time/position inputs, recording status where applicable, power supplies and alarm history; performance tests and calibration must follow approved manufacturer and statutory procedures.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry critical fuses, power supplies, interface modules, storage media where approved, sensors/transducers or display peripherals according to equipment criticality.
Equipment Model #131602 · ✓ still in production