Inmarsat Terminal · GMDSS
Epak DynaSat D80 is a shipboard satellite communications terminal listed in the supplied equipment record. It is normally installed with antenna equipment above deck and indoor modem, control or communication units connected to bridge or vessel networks. Its primary purpose is to provide long-range satellite voice, data, safety or operational communications according to the installed service. Compared with terrestrial VHF or MF/HF radio, satellite communication depends on terminal registration, antenna view of the satellite, modem configuration and network service availability. The model designation identifies a particular manufacturer configuration, but the supplied record does not define every hardware, material, control, or certification difference to adjacent models. For exact ratings, dimensions, settings, materials, connection details, and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Epak first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect antenna or radome, mounting, cabling, indoor units, power supply and network interfaces. Review signal-quality and terminal logs for recurring dropouts. Confirm vessel identity, service configuration and emergency functions where applicable. Antenna alignment, software and network settings should only be changed using approved documentation.
Carry fuses, power supplies where supported, network and RF cables, connectors, approved modem or terminal modules where vessel policy requires them and backed-up configuration information.
Free of charge — we forward your request to qualified suppliers for Epak equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Epak DynaSat D80 — a part, a service call, a second opinion. Are you Epak? Claim this brand page.
Service engineer? Write the day report for this DynaSat D80 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.