"> Furuno FS-5075 Mk2
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 103 verified suppliers & service companies for Furuno in the Maritime Network Find suppliers →
Is Furuno your company? Claim this page
Furuno

FS-5075 Mk2

Furuno FS-5075 Mk2 is a GMDSS MF/HF radio installation listed in the supplied equipment record. It is normally installed in the bridge radio console or dedicated radio station with antenna tuner, transmitting antenna and emergency power interfaces. Its primary purpose is to provide medium- and high-frequency voice and digital distress, safety and operational communications beyond normal VHF range. Compared with VHF radio, MF/HF equipment provides longer-range communication and usually includes an automatic antenna tuner and more complex antenna and grounding arrangements. The model designation identifies a particular manufacturer configuration, but the supplied record does not define every hardware, material, control, or certification difference to adjacent models. For exact ratings, dimensions, settings, materials, connection details, and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

dsc True
imo compliant True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Antenna, tuner or grounding faults cause high reflected power, failed tuning, reduced range or transmitter protection alarms
●Power-supply or emergency-power failure causes blank displays, resets or inability to transmit
●Microphone, handset or audio-path faults cause poor or absent transmitted or received audio
●DSC/controller or interface faults prevent distress calling, scanning or message handling and produce communication alarms
●Internal transmitter or receiver faults cause weak reception, no RF output or intermittent operation

Service & Maintenance

Inspect antennas, insulators, feeders, tuner, grounding or counterpoise connections, power supplies and operator controls. Test routine voice and DSC functions using permitted procedures and confirm emergency-power availability. Verify programmed ship identity and distress settings. RF measurements and alignment require approved service equipment and manufacturer documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry fuses, handset or microphone parts, approved power-supply modules where practicable, antenna connectors, tuner-interface cables and selected control or display spares.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Furuno?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #131027 · ✓ still in production