T-2028 X-Band 8ft
Wärtsilä (Transas) T-2028 X-Band 8ft is listed in the source as a marine Radar within the Radar & ECDIS group. Equipment of this type is typically installed on the bridge, with the antenna or scanner arranged in a clear position above deck and the operator equipment at the navigation console. Its primary duty is surface-target detection, collision-avoidance support and navigation awareness, and it relies on the sensor or scanner, signal processing, heading and position inputs, display functions and shipboard power working as one chain. Neighboring variants can differ in rating, size, interface, approval basis or arrangement, so the complete model designation and actual nameplate data are important for identification. It normally interfaces with ship power, heading input, position data, speed data and bridge alarms or network interfaces as fitted. For any exact capacity, pressure, voltage, tolerance, wear limit or setting not stated in the source, refer to the manufacturer documentation for the exact figure.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect scanner or antenna condition, cable entries, connectors, cooling paths, power supplies and bridge interfaces. Verify that heading, position and speed inputs are valid and that built-in alarms and test functions behave correctly. Check configuration and performance against the vessel's approved records and refer to the manufacturer documentation for exact test limits.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →