"> Furuno DRS25A-NXT Target Analyzer
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 103 verified suppliers & service companies for Furuno in the Maritime Network Find suppliers →
Is Furuno your company? Claim this page
Furuno

DRS25A-NXT Target Analyzer

Furuno DRS25A-NXT Target Analyzer is listed in this library as a marine bridge navigation unit in the Radar & ECDIS / Radar category. Equipment of this class is typically installed on the navigation bridge with sensor, scanner, processor, display, and interface components distributed as required by the installation. Its shipboard purpose is to provide the bridge team with radar-derived or electronically presented navigational information for collision avoidance, position monitoring, and situational awareness. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. No additional verified rating, capacity, weight, dimension, or operating limit is provided in the source entry. Where adjacent models in the same product family differ in rating, size, materials, control options, certification, or accessories, refer to the manufacturer documentation for the exact model-specific differences.

Components & Design

Component data being added…

Technical Data

solid state True
mode Target Analyzer

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Scanner, transceiver, or antenna-drive faults caused by component wear, water ingress, or mechanical obstruction lead to loss of echoes, rotation alarms, or a blank radar picture
●Display or processor faults caused by overheating, power problems, or electronic failure can cause freezing, rebooting, missing video, or loss of operator controls
●Poor heading, speed, position, or gyro input from interface faults can displace targets, vectors, overlays, or navigation calculations
●Antenna feeder, waveguide, network, or data-cable defects caused by corrosion or loose connections produce intermittent targets, communication alarms, or sensor dropouts
●Incorrect tuning, gain, clutter settings, configuration, or software data can degrade target presentation and create inconsistent navigation information

Service & Maintenance

Check power supplies, scanner and antenna condition, bearing and range performance, heading and position inputs, target presentation, alarms, interfaces, cooling, event logs, and any approved performance monitor. Configuration and alignment work should follow manufacturer and flag/class requirements.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Typical critical spares include approved fuses, fans or filters, interface and network components, operator-control items, and scanner/transceiver service parts according to the vessel's maintenance strategy. Refer to manufacturer documentation for exact parts.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Furuno?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #130754 · ✓ still in production